USER:

(1). Formosa Plastics Co.- Jen-Wu public plant, Kaohsiung Taiwan (2). Formosa Plastics Co.- Chung-Hua plant, Taiwan  

SERVICE:

Exhaust and fume contain SO2 and SO3 and temperature up to (1). 75-105oC, (2). 80-140oC.  

RESIN USED:

(1) SWANCOR 905FL-T (2) SWANCOR 907FL-T  

FABRICATING METHOD:

The structural part of the column was applied with SWANCOR 984M as primer on the sand-blasted surface (Sa 2 1/2), and then two coats of SWANCOR FLAKE were applied by trowel and a 5000V spark test was tested finally. Finalmente el recubrimiento fue sometido a spark text.  

FABRICATOR:

Den-Zu Enterprise Lee-Ea FRP Co.