Ion Film Caustic soda saltwater system Flake Lining

Case History: Ion Film Caustic soda saltwater system Flake Lining

About This Project

USER:
SINOPEC QILU COMPANY
LTD.-VCM Plant

CONDITION:
化盐器、clarifier、settling basin ect equipments linings.for NaCl at normal Temp.

RESIN USED:
Primer: SWANCOR 984-M Laminate: SWANCOR 901-FLT
Top-coat: SWANCOR 901-PW

FABRICATION METHODS:
1. The surface of the lining metal shall be sand-blasted to Sa 2 1/2 and be free of dirt, oil and water,then followed by a layer of SWANCOR 984-M primer.
2. Smooth the surface by SW 901 putty formulation.
3. Laminate two layers of SWANCOR 901-FLT to form 2.0mm flake anti-corrosive layers.
4. Finally laminate a layer of SWANCOR 901-PW primer.

DESIGN:
Chengda Company Ltd,China