About This Project
USER:
Hualon Corporation (M) Sdn. Bhd. in Nilai, Malaysia
SERVICE:
Polyester textile waste water
CAPACITY:
11 sets of lining tank, length up to 24 ft, width up to 24 ft, height up to 30 ft, total lining area up to 24,000 m 2.
RESIN USED:
SWANCOR 901 and SWANCOR CP 95 as concrete primer.
FABRICATING METHOD:
The structure laminate was built up with chopped strand mat after primer (SWANCOR CP 95) had been applied. Surface layers were resin-rich with C-veil.
MANUFACTURER:
Liang Chi (Malaysia) Sdn. Bhd.
DESIGNER:
Sun Chi Environmental Ind. Ltd.